SSIMS analysis of organics, polymer blends and interfaces

This paper gives a critical review on the applications of ToF SIMS in the areas of polymer additive characterization and in the study of polymer blends and interfaces. Polymer additives can readily be identified by ToF SIMS using their parent molecular ions or characteristic fragments. This analytical capability has been successfully applied to monitor the migration or segregation of additives during polymer processing. ToF SIMS is an ideal analytical tool for the study of polymer blends and interfaces because it is able to provide information on both surface composition and morphology. In combination with other analytical techniques such as AFM and XPS, ToF SIMS chemical imaging capability has opened up new horizons in the investigation of complex polymer blend systems. Finally the main advantages and limitations of ToF SIMS in these application areas are also discussed.     

Ruthenium-catalyzed regioselective synthesis of 2-substituted indoles via ring-opening of epoxides by anilines

Anilines react with epoxides in dioxane at 180°C in the presence of a catalytic amount of a ruthenium catalyst along with tin(II) chloride to afford 2-substituted indoles in moderate to good yields.     

Relaxor behavior of (Ba,Sr)(Zr,Ti)O3 ferroelectric ceramics

We examine the ferroelectric-relaxor behavior of (Ba_0.65Sr_0.35)(Zr_0.35Ti_0.65)O₃ (BSZT) ceramics in the temperature range from 80 to 380 K. A broad dielectric maximum, which shifts to higher temperature with increasing frequency, signifies the relaxor-type behavior of these ceramics. The value of the relaxation parameter γ∼2 estimated from the linear fit of the modified Curie-Weiss law, indicates the relaxor nature of the BSZT ceramics. The dielectric relaxation rate follows the Vogel-Fulcher relation with T_VF=107 K, E_a=0.121 eV, and ν₀=6.83×10¹⁴ Hz, further supports such relaxor nature. The slim P-E hysteresis loop and ‘butterfly’ shape dc bias field dependence of permittivity at T>T_m (T_m, the temperature of permittivity maximum) clearly signifies the occurrence of nanopolar clusters, which is the typical characteristic of ferroelectric relaxor. At 300 K and 10 kHz, the dielectric constant and loss tan δ are ∼1100 and 0.0015, respectively. The high tunability (∼25%) and figure of merit (∼130) at room temperature show that the BSZT ceramics could be a promising candidate for tunable capacitor applications.     

Quantitative vibration amplitude measurement with time-averaged digital speckle pattern interferometry

A new method of using time-averaged digital speckle pattern interferometry for the quantitative measurement of vibration amplitude was developed. Signal processing techniques especially the Hilbert transformation for quantitative evaluation of the Bessel fringes obtained in time-averaged digital speckle pattern interferometry were explored. The quadrature signal after Hilbert transformation is equivalent to a 90° phase-shifted interferogram for a monotonically increasing or decreasing phase function. An algorithm was developed for Bessel fringe contrast enhancement and phase extraction. The techniques were tested numerically and experimentally. Sub-fringe quantification of the time-averaged vibration fringes is realised with the proposed method. Compared with the commonly used phase shift method which requires a minimum of two images for image processing, this method requires only one fringe pattern for data extraction.     

Simulation of a turbulent premixed open V-shaped flame using contour advection with surgery

Despite its capability of high spatial resolution, simulation of turbulent flows with traditional Lagrangian (front tracking) scheme is often discouraged by numerical instability caused by clustering of marker nodes and topological changes of fronts. Contour advection surgery (CAS), being a robust front tracking scheme, can limit the growth of front complexity during simulation without jeopardizing accuracy or efficiency. This allows it to open up an advantage over traditional front-tracking schemes. It has already been demonstrated that CAS, with incorporation of the reaction sheet model, can accurately simulate the propagation and advection of a turbulent premixed V-shaped flame. In this study, it is further tested with 10 values of vortex circulation. A range of upstream turbulence levels of 1.8–19.8% was obtained. Results indicate that upstream turbulence increase the average flame length, flame zone area and the overall burning rate. Flame surface density Σ was also estimated. Maximum values of Σ obtained lie in the range 0.1–1.4 mm⁻¹. Skewness towards the burnt region was observed in all profiles of Σ. Similar to results from laboratory experiments, it was found that Σ values decreases with upstream turbulence. From this study, the ability of CAS to cope with intense turbulence is demonstrated and a better quantitative understanding on the scheme has also been acquired.     

On a nonlinear multigrid algorithm with primal relaxation for the image total variation minimisation

Digital image restoration has drawn much attention in the recent years and a lot of research has been done on effective variational partial differential equation models and their theoretical studies. However there remains an urgent need to develop fast and robust iterative solvers, as the underlying problem sizes are large. This paper proposes a fast multigrid method using primal relaxations. The basic primal relaxation is known to get stuck at a ‘local’ non-stationary minimum of the solution, which is usually believed to be ‘non-smooth’. Our idea is to utilize coarse level corrections, overcoming the deadlock of a basic primal relaxation scheme. A further refinement is to allow non-regular coarse levels to correct the solution, which helps to improve the multilevel method. Numerical experiments on both 1D and 2D images are presented.     

Synthesis and addition polymerization of vinylbenzyl transition metal compounds

Summary The synthesis of three vinylbenzyl complexes (n⁵-C₅H₅)-M(CO)_n(CH₂C₆H₄CH=CH₂), [1), M=Mo, n=3; (2), M=W, n=3; (3), M=Fe, n=2] is reported. Complexes (1) and (2) have been copolymerized with monomers, such as styrene, methyl methacrylate, andN-vinyl-2-pyrrolidone, in benzene using azoisobutyronitrile as initiator. The rates of incorporation of (2) into copolymers with styrene and methyl methacrylate were the same as the rate of incorporation of the organic monomer. The homopolymerization of (2) was also carried out. Polymerizations occurred satisfactorily except for the copolymerization of (1) with styrene, where little incorporation of the organometallic monomer occurred.     

Elevation of the glass transition temperature in flexible‐chain semicrystalline polymers

In the idealized two‐phase model of a semicrystalline polymer, the amorphous intercrystalline layers are considered to have the same properties as the fully‐amorphous polymer. In reality, these thin intercrystalline layers can be substantially influenced by the presence of the crystals, as individual polymer molecules traverse both crystalline and amorphous phases. In polymers with rigid backbone units, such as poly(etheretherketone), PEEK, previous work has shown this coupling to be particularly severe; the glass transition temperature (T_g) can be elevated by tens of degrees celsius, with the magnitude of the elevation correlating directly with the thinness of the amorphous layer. However, this connection has not been explored for flexible‐chain polymers, such as those formed from vinyl‐type monomers. Here, we examine T_g in both isotactic polystyrene (iPS) and syndiotactic polystyrene (sPS), crystallized under conditions that produce a range of amorphous layer thicknesses. T_g is indeed shown to be elevated relative to fully‐amorphous iPS and sPS, by an amount that correlates with the thinness of the amorphous layer; the magnitude of the effect is severalfold less than that in PEEK, consistent with the minimum lengths of polymer chain required to make a fold in the different cases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1198–1204, 2007